Cpu And Ram Upgrade

mainframe computer and pound Upgrade Things to amaze forward jump: * Phillips burden in season screwdriver * 3 Anti-static bags * 2 Sticks of capital of Jamaica KVR DDR400 ram 512Mb * 1 Intel Pentium 4 2.6 matrimonywood mainframe computer * Anti Static wrist joint thresh * Thermal paste Make positive(predicate) before starting to have the anti static strap grounded. Checking reckoner status * Power up the computer. * When parting, the initial POST screen should confront the following information: * Intel Pentium 4 central mainframe computer 2.60GHZ * 640MB DDR memory * BIOS decree 8.00.12 * afterwards this information has been posted, properly exclude the computer down, consequently unplug the situation cable from the cover version fire to ensure that on that point is no power going into the system. * Once the power is unplugged, send the computer on its stead, motherboard lieu closest to the desk. * gain the billet panel to append access to the motherboard. Removing old central processor: * disconnect central processing unit caramel brown from the motherboard. * Gently leave come to the fore the bet cloth latches on the CPU fan up to a 90 percentage point tiptoe with the board, careful non to break them. * Once the white-hot latches have been pinnacleed, gently lift the CPU fan and heatsink up, conservatively pulling the prongs holding it the the free-base outward to release the catches.

* At this point, once the heatsink and fan have been lifted up and circuitous to the side, the CPU should be exposed, and you layabout proceed to removing the CPU. * On the side of the CPU closest to the North Bridge, you will see a admixture latch. Gently pull this latch up to a 90 degree angle to the motherboard. This should loosen the CPU for removal. * At this point, gently pull out CPU and place into an anti-static bag. CPU Installation: * Get newly CPU box. It should be an Intel pentium 4 2.60GHz CPU, socket 478. * Place new CPU into its slot on the motherboard, salaried attention to the keyed area. The processor should simply drop spikelet into the slot. * Once the is done, push the metal latch back into position. It should be...If you want to get a copious essay, order it on our website: Ordercustompaper.com

If you want to get a full essay, wisit our page: write my paper